Diver

SSBA to 50m (Part 3)

Course overview

The SSBA to 50m (Part 3) certification is a progressive step from ADAS Part 2 and includes the use of surface-supplied breathing apparatus. The qualification significantly increases the diver‘s ability to operate under working situations including the use of wet bells, deck decompression chambers and other work related subjects to meet offshore diving industry requirements.

The objective of Part 3 training is to prepare Part 2 Divers to both safely and competently:

  • dive on SSBA to depths of 50m
  • use hydraulic tools at depths to 50m
  • conduct decompression dives using in water decompression and SurDO2
  • act as chamber operators
  • dive using hot water suits, and operate hot water generators
  • engage in diving operations using wet bells as a in-water standby diver and surface standby diver.

Course standards

This course meets the standards of:

  • AS 2815.3 – Air Diving to 50 metres.
  • Certificate IV in Hyperbaric Operations (Surface-supplied diving to 50m). National Qualification Code 10133NAT.

Note: If you study at an ADAS training establishment outside of Australia you may not be eligible for this Australian Qualifications Framework certificate. The ADAS licence, however, is issued at all ADAS training establishments.

Student prerequisites

Before applicants commence ADAS SSBA to 50m (Part 3) training, the ATE must ensure that they:

  • Hold either a current ADAS Part 2 qualification or approved equivalent, have qualified at an ADAS Part 2 course in the previous one month or are currently engaged in an integrated Part 2 – 3 course.
  • Are in possession of a valid certificate of medical fitness to dive (see AS/NZS 2299.1) issued, after examination, by a doctor trained and experienced in underwater medicine in accordance with the requirements in AS/NZS 2299.1, and that certification remains valid until the scheduled completion date of the training being undertaken. If the applicants’ health has changed significantly since the medical certificate was issued, the applicant shall seek an appropriate medical review;
  • Hold either a recognised current Diver Medic Technician certificate or a current First Aid certificate from an accredited training organization (i.e. has been certified within 3 years of the conclusion of the proposed training program) and CPR and oxygen resuscitation skills must have been refreshed within the 12 month period prior to the conclusion of the training program. The student’s First Aid qualifications must meet the competency requirements of AS/NZS 2299.1 Occupational diving operations standard operational practice.
  • Unless Non-English Language (NEL) speaking course arrangements have been made with ADAS, can understand written and verbal communication in English, and can communicate effectively in English with other persons.
  • Is able to add, subtract, multiply and divide whole numbers, decimals and vulgar fractions; calculate percentages; and transpose and solve simple formulas, eg gas laws.

Competencies

The following units of competency are completed:

  • ADAHYP401A Work safely in hyperbaric operations
  • ADAHYP402A Maintain effective working relationships within dive or hyperbaric operations team
  • FSKNUM14 Calculate with whole numbers and familiar fractions, decimals and percentages for work
  • BSBWHS201 Contribute to health and safety of self and others
  • ADADIV403A Apply knowledge of anatomy , physiology and diving physics to diving
  • ADADIV404A Assess diving casualty and assist with treatment of diving conditions
  • ADASSB411A Utilise and maintain surface-supplied diving equipment
  • ADASSB412A Undertake pre-dive preparations for a surface-supplied diving operation
  • ADASSB413A Undertake underwater deployment in a surface-supplied diving operation
  • ADASSB414A Implement emergency procedures for a surface-supplied diving operation
  • ADASSB415A Undertake post-dive procedures for a surface-supplied diving operation
  • ADADIV453A Perform underwater tasks for a diving operation
  • ADACON416A Perform underwater work with powered tools
  • ADACON417A Perform underwater work using cutting and welding
  • ADACON418A Perform underwater construction work tasks
  • ADACON419A Identify basic safety and statutory requirements for underwater explosives work
  • ADADIV461A Ensure health and safety in occupational diving in compliance with legislation
  • ADADIV462A Work effectively in the occupational diving industry
  • ADASSB456A Undertake underwater deployment for a surface-supplied diving operation to 50m
  • ADADMT428A Assist as an attendant inside a hyperbaric chamber
  • ADAHYP438A Prepare, operate and maintain twin-lock compression chamber
  • ADASSB460A Use hot water suit and hot water supply system to perform underwater tasks
  • ADADIV474A Work safely in offshore diving operations
  • ADASSB457A Participate in stage or wet bell diving operations
  • SISOSCB317A Complete a dive using Enriched Air Nitrox (EANx)
  • ADASSB458A Use enriched air nitrox in occupational diving operations

Delivery & Assessment

Part 3 certification assumes and requires Part 2 certification or approved equivalent. The Part 3 SSBA course can be conducted separate to, or amalgamated with, Part 1 Occupational SCUBA to 30m and/or Part 2 Occupational SSBA to 30m.

The ADAS SSBA to 50m (Part 3) program comprises a minimum of four (4) weeks. That is a minimum of twenty course (20) days are to be programmed to meet the training, assessment and administration requirements of the course. It must be conducted according to the requirements outlined in this document.

Subsea Training Centre (STC)

(Formerly New Zealand School of Commercial Diver Training)
63 Rotowaro Road
Huntly, New Zealand

International Diving Academy (IDA)

Lot 3572 Jalan Panchur
Kawasan Perindustrian Teluk Kalong
Kemaman, 24000
Terengganu
Malaysia

Royal New Zealand Navy Diving School

HMNZS Philomel, Devonport AUCKLAND, New Zealand

Commercial Dive Academy

Inspection Head Wharf, 200 Flinders Street, BEAUTY POINT TAS 7270